Standard Pump, Inc. -- Drum Pumps & Metering Systems

SP-8100 & SP-8200 Pump Motors

SP-ODP Series

<Back to Last Page

Engineered for use in corrosive environments. Ideally suited for transferring acids and alkalies.

					SHIPPING WT
MODEL	ENCLOSURE	POWER	WATT	V.S.D.	lbs	(kg)
SP-ODP	O.D.P	115/1/50-60	450	NO	5.5	(2,5)
SP-ODP-2	O.D.P	230/1/50-60	450	NO	5.5	(2,5)

SP-ODP SERIES Spare Parts List

NOTE: V.S.D. = Variable Speed Drive

Warning: Not suitable for pumping flammable or combustible liquids.

SP-280P Series

<Back to Last Page

Engineered for use in corrosive environments. Ideally suited for transferring acids and alkalies.

					SHIPPING WT
MODEL	ENCLOSURE	POWER	WATT	V.S.D.	lbs	(kg)
SP-280P	Open Drip Proof (IP44)	110-120V/1/50-60Hz	825	NO	9.0	(4,0)
SP-280P-V	Open Drip Proof (IP44)	110-120V/1/50-60Hz	825	YES	9.0	(4,0)
SP-280P-2	Open Drip Proof (IP44)	110-120V/1/50-60Hz	825	NO	9.0	(4,0)
SP-280P-2-V	Open Drip Proof (IP44)	110-120V/1/50-60Hz	825	YES	9.0	(4,0)

SP-280P SERIES Parts List

NOTE: V.S.D. = Variable Speed Drive

Warning: Not suitable for pumping flammable or combustible liquids.

SP-ENC Series

<Back to Last Page

Engineered for use in heavily corrosive environments or when aggressive fumes are present. Ideally suited for transferring concentrated acids and alkalies.

					SHIPPING WT
MODEL	ENCLOSURE	POWER	WATT	V.S.D.	lbs	(kg)
SP-ENC	TEFC (IP54)	110-120V/1/50-60Hz	825	NO	12.7	(5,7)
SP-ENC-V	TEFC (IP54)	110-120V/1/50-60Hz	825	YES	12.7	(5,7)
SP-ENC-2	TEFC (IP54)	110-120V/1/50-60Hz	825	NO	12.7	(5,7)
SP-ENC-2-V	TEFC (IP54)	110-120V/1/50-60Hz	825	YES	12.7	(5,7)

SP-ENC SERIES Spare Parts List

NOTE: V.S.D. = Variable Speed Drive

Warning: Not suitable for pumping flammable or combustible liquids.

SP-400-2

<Back to Last Page

Engineered for use hazardous duty locations. Ideally suited for transferring flammable/combustible liquids.

					SHIPPING WT
MODEL	ENCLOSURE	POWER	WATT	V.S.D.	lbs	(kg)
SP-400-2	Explosion Proof	220-240V/1/50-60Hz	550	NO	24	(11)
ATEX Certification: DEMKO 04 ATEX 136195X II 2 G EEx de IIA T6

SP-400-2 SERIES Spare Parts List

NOTE: V.S.D. = Variable Speed Drive

See warning at bottom of page.

SP-A1

<Back to Last Page

Engineered for use in heavily corrosive environments or
when aggressive fumes are present.Ideally suited for transferring flammable / combustible liquids.

		MAXIMUM		SHIPPING WT
MODEL	CONSUMPTION	INLET PRESSURE	OUTPUT	lbs	(kg)
SP-A1	22 CFM @ 90 psi	100 psi	1/2 HP	2.7	(1,2)
	10.4 L/sec @ 6,2 bar	6,8 bar	370 W

SP-A1 Spare Parts List

SP-A2 Series

<Back to Last Page

Engineered for use in heavily corrosive environments or
when aggressive fumes are present.Ideally suited for transferring flammable / combustible liquids.

		MAXIMUM		SHIPPING WT
MODEL	CONSUMPTION	INLET PRESSURE	OUTPUT	lbs	(kg)
SP-A2	28 CFM @ 90 psi	100 psi	3/4 HP	3.4	(1,5)
	13.2 L/sec @ 6,2 bar	6,8 bar	560 W
SP-A2L	28 CFM @ 90 psi	100 psi	3/4 HP	3.4	(1,5)
(trigger lock)	13.2 L/sec @ 6,2 bar	6,8 bar	560 W

SP-A2 Spare Parts List

WARNING: Pumping of flammables or combustible liquids can generate a static electric discharge, causing fire or explosion resulting in injury or death. Read and understand operating instructions before starting this unit. Follow all federal, state and local safety codes including NFPA 30 - NFPA77. Prior to connecting to air supply, install bond and ground wires and check continuity of each wire. A meter reading of one ohm or less is required for safe liquid transfer. Use only metallic drum, receiving vessel and metallic pump (SP-SS) when pumping flammables. Air motors are not recognized under any current Underwriter’s Laboratory listing program. Consult a qualified engineer for suitability for use in a hazardous area or on flammables.