|
Engineered for use hazardous duty
locations. Ideally suited for transferring flammable/combustible
liquids.
|
|
| |
SHIPPING WT |
MODEL |
ENCLOSURE |
POWER |
WATT |
V.S.D. |
lbs |
(kg) |
| SP-400-2 |
Explosion Proof |
220-240V/1/50-60Hz |
550 |
NO |
24 |
(11) |
| ATEX Certification: DEMKO 04 ATEX 136195X II 2 G EEx de IIA T6 |
|
 |
WARNING: Pumping of flammables or combustible liquids can generate a static electric discharge, causing fire or explosion resulting in injury or death. Read and understand
operating instructions before starting this unit. Follow all federal, state and local safety codes including NFPA 30 - NFPA77. Prior to connecting to air supply, install
bond and ground wires and check continuity of each wire. A meter reading of one ohm or less is required for safe liquid transfer. Use only metallic drum, receiving vessel
and metallic pump (SP-SS) when pumping flammables. Air motors are not recognized under any current Underwriter’s Laboratory listing program. Consult a qualified
engineer for suitability for use in a hazardous area or on flammables. |
|
