Standard Pump Inc.  |  All Rights Reserved

Tel: 770-307-1003

ISO Certified :  ISO 9001:2008
**WARNING**
 Pumping of flammables or combustible liquids can generate a static electric discharge, causing fire or explosion resulting in injury or death. Read and understand operating instructions before starting this unit. Follow all federal, state and local safety codes including NFPA 30 - NFPA77. Prior to connecting to air supply, install bond and ground wires and check continuity of each wire. A meter reading of one ohm or less is required for safe liquid transfer. Use only metallic drum, receiving vessel and metallic pump (SP-SS) when pumping flammables. Air motors are not recognized under any current Underwriter’s Laboratory listing program. Consult a qualified engineer for suitability for use in a hazardous area or on flammables.
CLICK EACH LINK 
TO VIEW OR DOWNLOAD
 PDF VERSIONS OF DOCUMENTATION

Model

Consumption

Output

lbs.

SP-A2

28 CFM @ 90 psi

3/4 hp

3.4 lbs


13.2 L/sec @ 6,2 bar

560 w


SP-A2TL

28 CFM @ 90 psi
3/4 hp3.4 lb
( Trigger Lock )
13.2 L/sec @ 6,2 bar
560 w


MODEL | Power

Engineered for use in heavily corrosive environments or when aggressive fumes are present.

Ideally suited for transferring flammable / combustible liquids.

Motors | SP-A2

TECHNICAL DOCUMENTATION