				Call Us 770-307-1003
International Offices		Languages		Distributors

Turbine Flow Meter

Digital Inline Flow Meters -- Paddle Wheel

Digital Flow Meter
Paddlewheel Technology

STANDARD’S Flow Meters address a broad scope of applications ranging from inert solutions to aggressive chemicals. These meters utilize a proven paddle wheel design and are available in a variety of sizes and materials. Meters are available in three configurations: Kits for Drum Pumps, Barb Connections, or Permanent Installation.

Common Applications
Pump Monitoring Gravity Feed Applications From Tanks Continuous Flow Measurement Adding Chemistry to Plating Tanks Chemical Packaging Blending Agricultural Products Adding Colors and Fragrances

Features

Measures Flow Rate and Volume
IP65 Enclosure
Re-settable Totalizer
Battery Status Indicator
User Friendly “In Field” Calibration
EE Prom Electronics
Two Line Alphanumeric Display Shows
Flow Rate & Total Flow Together

Technical Data
Available Sizes	Polypropylene & PVDF 0.5" (13 mm) – 1.5" (38 mm) SS316 0.75" (19 mm) – 1.25" (32 mm)
Accuracy	+/- 0.61% of Full Scale +/- 1% of Reading
Available Materials	Polypropylene, PVDF and SS316
Maximum Viscosity	300 cps (mPas)
Units of Measure:	Gallons, Liters, Cubic Meters
Temperature Range	Polypropylene -4º–176º F (-20º–80º C) Stainless & PVDF -22º–212º F (-30º–100º C)
Metering Principle	Turbine (Paddle Wheel)
Max. Operating Pressure	150 psi (10,5 bar) @ 70º F (20º C)
Flow Range	0.5" (13 mm): 0.42 GPM (1,6 LPM) - 22.4 GPM (84,8 LPM)
	0.75" (19 mm): 0.75 GPM (2,8 LPM) - 39.8 GPM (150,7 LPM)
	1" (25 mm): 1.17 GPM (4,4 LPM) - 62.2 GPM (235,4 LPM)
	1.25" (32 mm): 1.91 GPM (7,2 LPM) - 102 GPM (386,1 LPM)
	1.5" (38 mm): 2.99 GPM (11,3 LPM) - 159.3 GPM (603 LPM)

Turbine Flow Meter Spare Parts List